After Treatment
Clean the treatment window each time after use.
Regularly clean to prevent the device from failing or malfunctioning.
When cleaning the device, make sure to switch the main power off and disconnect the AC adapter from
the device and wall outlet.
How to clean
●
Cleaning the device
1
Wet a piece of cloth with water and firmly
wring it dry before wiping away stains
from the surface of the device.
・
If the device is very dirty, wipe the surface of the device with a
sponge or piece of cloth containing a mild, diluted detergent
solution.
・
Refrain from using an alkali cleaning agent, alcohol, thinner,
benzene, nail polish remover, or other such substance.
●
Cleaning the lamp head
1
Wet a piece of cloth with water and firmly wring it dry before
wiping away stains from the surface of the device.
* Do not wipe the filter (glass plate) with water.
Failure to comply may result in a failure of the device.
2
Use a soft piece of cloth or cotton swab on hand to remove stains
and bits of loose hair adhering to the filter (glass plate).
* Wipe away fingerprints and other stains to maintain the device in a clean state.
Failure to comply may cause the filter to become scorched, a diminishment of flash performance, a
failure of the device, or skin problems.
After Treatment
Warning
●
Unplug the AC adapter from the wall outlet before cleaning the device.
Failure to comply may cause an electric shock, short circuit, or fire.
●
Clean in a manner that prevents water from infiltrating the device.
Failure to comply may cause an electric shock, short circuit, or fire.
After Treatment
How to store
●
When the device will not be in use for an extended period, store the device after cleaning the device and
lamp head.
●
When the device is not in use, store the device after turning it off and unplugging the AC adapter from
the wall outlet.
●
A v o i d u s i n g o r s t o r i n g t h e d e v i c e n e a r a s t o v e o r h e a t e r o r i n a b a t h r o o m o r o t h e r
high-temperature/high-humidity location, location where there is exposure to direct sunlight, or unstable
location.
●
Keep away from children.
Maintenance and inspections
●
When using the device again after a prolonged period of non-use, verify before use that the device
operates normally and safely.
●
If the device is malfunctioning, go to page 25 (Troubleshooting) and attempt to address the situation
yourself before arranging to have the device repaired. If the problem persists, inquire with the seller from
which you purchased the device or contact your local distributor.
●
If the device is malfunctioning or damaged, contact the seller from which you purchased the device or
your local distributor for advice on repairing the device.
24
23
