Version 1.0
PartPro120 xP Operation Manual
USER INTERFACE
The printing system is operated using the touch panel on the printer and the software “XYZprint AM
UV
”. You will
need to switch between the different interfaces based on your operation.
Refer to below table for the functions available on each user interface:
Category
Function
Touch Panel
XYZprint AM
UV
File Preparation
Preparing the files
Printing Controls
Printing new files
Printing from the history
Pausing the production
Resuming a paused task
Canceling the production
File Management
Deleting files on the printer
System Configuration
Configuring printer settings
Configuring the connectivity
Updating printer firmware
Info Display
Production History
Printer Status
Material Status
System Version
Machine Statistics
TOUCH SCREEN
The printer screen shows the following menu when the system is ready. You can use the touch screen to print
from the history, adjust the printer settings, and view the information on the material installed and resin
temperature and system data.
The control panel functions are categorized under the following options in the main menu:
Main Menu
Function
A Resin Temperature
Current temperature of the resin in the tank in degree Celsius. If the resin
temperature is lower than 25
℃
, the heating system will be triggered.
A
B
E
C
D
11
