V1.2
P 5
Chapter 2 Unpacking and Setup
1
2
3
8
9
10
11
Open the box and remove
the accessories and the
cushion.
Take out the printer by the
grip holds.
Note: All packaging materials should be removed before powering up the printer.
Remove plastic bag and
all tapes.
Open the top cover, and
remove the cushions by the
extruder
Remove the tape on the
print bed.
Remove the packaging
supports and tapes from
inside.
Remove the cardboard.
Remove the cushions by
the print bed.
Remove the bottom screw
and plastic piece under
print bed.
Insert the USB flash drive to install XYZware
for printing.
Use the USB cable to connect the printer to
PC. Connect the power cord to the printer
then turn on the power switch.
4
6
5
7
Open the box
Packing support x2
Cable tie
x1
Tape x2
