V1.2
P 19
After choosing the files from the USB flash drive, My Gallery, Sample or Cloud Gallery, or transmitting
the files to the printer from XYZware…
Apply glue stick gently and evenly to the
print bed base on the size of the printing
object previewed on screen.
Remove the printed object when the
print bed has descended.
After the printing, the screen will show the temperature of the print bed. Take out the printed object
after the temperature of the print bed is cooling down to the room temperature.
Printing process is shown on
the screen. You may click
for Printer info during printing
and tap cancel or pause to stop
printing .
Press
to print or press
to
change filament.
Cover a damp cloth on the cold print
bed for 2-3 minutes, and wipe the
glue off gently (Scrape off the glue if
necessary).
1
3
2
4
Chapter 8 Printing Steps
