V1.2
P 10
Load Filament
5
6
7
Insert filament into the guide hole until the printer starts to load
filament.
(When the loading begins, you will hear the sound of motor and
can see filament is pulled into the printer.)
Note : Before pushing the filament into the guide hole,
avoid bending
the filament while loading filament
and cut the tip of the filament off
at a 45° angle with a cutting pliers, filament loading will be easier.
Wait for the printer to install
filament and heating extruder.
If filament doesn't come out from the nozzle,please press
or
. When filament is dripping off the nozzle, tap
to finish.
1
Remove the filament
stopper and tape.
2
Install the new filament cartridge
into the empty slot.
3
Place and push to click the cartridge.
4
Select "Filament" > "Cartridge " > "Load".
