V1.2
P 4
Please read this manual carefully before operating the printer. The following warnings and attention
notices are a best effort attempt to cover all scenarios; unfortunately it is not possible to do so. In
the case of performing maintenance procedures that are not described in this manual the burden of
safety falls to the customer side.
For basic safety and precautions adhere to the following:
Chapter 1 Important Safety Instruction
● Do not let children operate this device without adult supervision. Electric shock hazard. Moving parts can
cause serious injury.
● Do not place the printer on an unbalanced or unstable surface. Printer may fall or tumble causing harm
and/or injury.
● Do not place any objects on top of the printer. Liquids and objects that fall into the printer can lead to
printer damage or safety risks.
● Do not use flammable chemicals or alcohol wipes to clean this device.
● Do not disassemble or replace the printer cover with none XYZprinter covers.
● Do not touch heated surfaces during or after operation. Heated surfaces can cause severe burns.
● Insert and secure the power cord firmly for proper usage and to avoid potential electricity and fire
dangers.
● Do not attempt to service the printer beyond the instructions specified in this document. In the case of
irrecoverable problem, contact XYZprinting service center or your sales representative.
● Please place and use the printer in a well ventilated area. The process of heating the filament will
produce a small amount of non-toxic odor. Having a well ventilated area will ensure a more comfortable
environment.
● This printer is only to be used with filament specified by XYZprinting.
● Make sure to set the power switch to the off position and remove the power cord before transporting the
device.
● Some components of the printer are moving during operation. Do not attempt to touch or change anything
inside before power off the printer.
