Xytronic LF-8000, Instruction Manual

Page: 3 / 16

2
cooler handle, improving operator comfort.
LF-8000 incorporates electronic circuitry which enables the user to fine tune
soldering tip temperature from 200
℃
(392
℉
) through 450
℃
(842
℉
) and
desoldering tip temperature from 300
℃
(572
℉
) through 450
℃
(842
℉
) without
changing tips or heating elements. Both soldering and desoldering irons are equipped
with a precision would nichrome heating elements, both offer 32V/100W output. Also
there is an optional fume extraction kit can be equipped easily on the soldering iron.
The temperature is maintained /-3
℃
(+/-6
℉
) of its operating temperature by
a thermocouple sensor to ensure maximum temperature as close to the working
surface of the tip as possible. This results in both a rapid heat up, fast recovery and
exacting temperature control with minimal overshoot. The ergonomic and slender
soldering iron design with a comfortable silicone rubber grip prevents operator
fatigue.
The revolutionary “Zero Voltage” electronic switching design also protects voltage
and current sensitive components (CMOS devices etc.) against damaging current and
transient voltage spikes commonly produced by less efficient, mechanically switched
stations. The power unit is isolated from the A.C. line by a transformer and allows
32Vac for soldering and desoldering to drive the heating elements. Both soldering and
desoldering are constructed with an individual calibration port locating under the
digital display on the face of the unit for quick and convenient precision temperature
adjustments.
The new LF-8000 has been developed to meet the present and future needs of the
electronic production industry and is ideal for use at any AC outlet. Engineered to
meet the demanding needs of the hobbyist, service & repair technician as well as
production people alike.
WORKING TEMPERATURE
To meet RoHS requirements, the common 60/40 lead solder alloys are not allowed in
the production process. Lead free solder alloys require a working temperature of 30
℃
(54
℉
) higher than previous generation electrical soldering. The working temperature
of solder is detailed below and can vary from manufacture to manufacture.
Melting point 220
℃
(428
℉
)