background image

 

KEY FEATURES   

EXTERNAL CALIBRATION PORT: The LF-8000 has two calibration ports on the 

front panel for both soldering/desoldering for quick and convenient precision 

temperature adjustments.   

 

DELAYED SUCTION: To eliminate the problem of solder clogging up the tip, a 

delayed switch feature has been incorporated for the unit that allows the pump to 

continue sucking for 1.5 seconds after the actuator switch is released. 

 

*LIGHTWEIGHT SOLDERING IRON: Ergonomic mini handle that stays cool and 

prevents operator fatigue.   

 

*OPTIONAL TWEEZERS: This additional feature is specially designed for SMD 

chips, SOT, Flat pack ICs’ etc. rework. Tweezers TWZ100 is equipped with 32V/50W 

x 2 conventional nichrome heater, which can be interchangeable with soldering iron 

210ESD as an option.   

 

*ENERGY SAVER: After the station has been idle for more than 15 minutes, this new 

feature will automatically knick in. When the “Pause” LED is lit, the energy saver 

feature has engaged, decreasing tip temperature by 1/3 which cuts power consumption 

and extends tip life.   

 

* CELSIUS/FAHRENHEIT SWITCH: To address the global market place, a 

convenient switch has been incorporated to easily convert from one common measure 

to another. 

 

                                           

PRODUCT DESCRIPTION 

LF-8000 operates basically the same as the standard digital readout 988D but with the 

high power 32V/100W soldering and desoldering irons which are specially designed 

for lead-free soldering works to meet RoHS requirement.   

 

This unit built in a self-contained, oil free, maintenance free, and quiet running 

vacuum pump which is electronically controlled and will not overload with 

continuous use, eliminating the need for additional shop air. The vacuum pump 

provides up to 50cm/Hg (20in/Hg) suction power, activated by a push button 

switching circuit located on the desoldering iron housing. Internal solder collector in 

handpiece is quickly and easily removed for cleaning. The inside mesh aluminum   

cooling strip has better solder chip adherence. Also the ventilation slots makes for a 

Summary of Contents for LF-8000

















Reviews: