Turb PLUS 2000
Setup
, Configuration and Calibration
38
100193 Rev 0 ba77254e01 11/2020
6.2.16
Download Logged Files – Select to Download
This menu is used to download CSV files to a flash drive. The selections are No download (NO),
Calibration file only (CAL), All Files (ALL) or individual month (Jan, Feb…). Once the data stick is
inserted into the USB slot on the right side of the instrument push the
button. If no data stick is
inserted you will get an Error (Err). See section 7.4.2 File Downloads
for more information. The
upper display will flash while the download is taking place and show dOnE when complete.
To set the data download:
1. Enter the
CONFIG
mode by pressing the
and
buttons until the arrow beside
CONFIG
is
illuminated, then press the
button.
2. Press the
button to move to the next menu until
DOWN
is displayed.
3. The selection can be adjusted by using the
and
buttons.
4. Once the selection is made
press the
button to accept it and move to the next menu or the
button
to exit and return to
AUTO.
6.2.17
Date and Time – Setting of Instrument Time & Date
The Turb PLUS 2000 has a displayed date (month / day / year) and time (hour / minute / Daylight
Savings) that must be set upon initial installation/setup. The next five menus are used for this
setup.
To set the Month:
1. Enter the
CONFIG
mode by pressing the
and
buttons until the arrow beside
CONFIG
is
illuminated, then press the
button.
2. Press the
button to move to the next menu until
MNTH
is displayed, then press the
button.
3. Change the month by pressing the
or
button.
4. When the desired month has been selected, press the
button to accept it and move to the next menu
or the
button to exit and return to
AUTO
.
