Alyza IQ PO4
Commissioning
63
ba76201d03
05/2020
3
Insert the collection funnel (7) in the opening of the cable gland (9) in
the housing:
the beveled side of the collection funnel (7) points to the heat tracing
(1)
the drain of the collection funnel flows into the return line for the sam-
ple return.
4
Pull off the short sample overflow tubes from the overflow vessels.
5
Cut off pieces of the transparent sample overflow tube included in the
scope of delivery long enough that the new sample overflow tubes go
from the overflow vessels to the foremost collection funnel.
6
Plug the fitted sample overflow tubes to the overflow vessels.
7
Pull the rubber cover (4) of the collection funnel over the edges of the
collection funnel.
The opening of the collection funnel should be closed tightly.
8
Put the sample overflow tubes of the overflow vessels into the collection
funnel through the big openings of the rubber cover.
9
Close any unused openings of the rubber cover with the plugs provided
so that the housing is protected from humidity.
Summary of Contents for WTW Alyza IQ PO4
Page 171: ......
