Heat / Cooling Meters Calculator Unit
PolluTherm can be combined with PolluFlow
Installation and Operating Instructions
MH 6114 INT PolluTherm, Page 11
Next due date
Operating days
Battery voltage
(calculated) *
Accumulated error hours
Hours with power supply
failure
(only relevant for power
supply) *
Primary M-Bus address
(factory setting: 0)
Secondary M-Bus
address (factory setting:
Serial number)
Data transmit mode
(length and structure of
theM-Bus protocol)
Version of the Firmware
Check sum
High resolution energy
display
High resolution
volume
Return to the selection
menu
(press for 2 seconds)
7.5 Control Level for Tariff Purposes
(Example)
Each display position is indicated by the word
CTRL“. Settings for the tariff functions can be
checked here.
Averaging interval set for
the flow and energy
energy in the actual
averaging interval
Flow in the actual
averaging interval
Setting tariff 1
(if activated) *
Switching point for inlet
flow temperature cooling
metering
(if activated) *
Switching point for outlet
temperature difference
cooling metering
(if activated) *
Correction factor for
water/frost protection
mixture (if activated)
(only in combination with a
mechanical flow sensor)
Return to the selection
menu
(press for 2 seconds)
7.6 Parameterization Level (Example)
Each display position is indicated by the tool
symbol.
This level is protected by a password. The
password is the last three digits of the eight digit
serial number on the meter housing. Initially, "000"
appears. Next, press the button for approx. 2
seconds and the left zero starts to flash. By
constantly pressing the button, the value at the
flashing position changes. As soon as the
required values are reached, release the button.
By shortly pressing the button, the value set is
confirmed and switches to the next position.
Proceed here as you did in the previous position.
After the last position is set, the level is activated.
Now, by shortly pressing the button, the required
positions can be selected; setting the values is
carried out by manually entering the password.
