background image

Heat / Cooling Meters Calculator Unit  

PolluTherm can be combined with PolluFlow 

Installation and Operating Instruction 

 

 
MH 6114 INT PolluTherm, Page 10 

7.3 Archive Level (Example) 

 
All display positions are indicated by a calendar 
symbol. Originating from the actual date, the 
values are displayed for the past 16 months 
(Date in six digits in the form dd.mm.yy below the 
main display). 
In addition, the values for the present month can 
be accessed, in this case, the month must be 
selected as "today". 
 

 

Selection of the required 
month by shortly pressing 
the button, then press the 
button for 2 seconds  

 

Heating and cooling 
energy 

 

volume 

 

Tariff consumption 1 
(if activated) * 

 

Tariff consumption cooling 
(if activated) * 

 

Consumption of the first 
external meter * 

 

Consumption of the 
second external meter * 

 

Maximum flow in the 
selected month with date 
(averaged) 

 

Maximum flow in the 
selected month with time 
(averaged) 

 

Maximum energy in the 
selected month with date 
(averaged) 

 

Maximum energy in the 
selected month with time 
(averaged) 

 

Failure hours 

 

Hours with power supply 
failure 
(only relevant for power 
supply) * 

 

Return to the month 
selection 
(press for 2 seconds) 

To exit the archive level, press the button twice 
when a month change is displayed, or wait for 5 
minutes. 
 
 
 

7.4. Service Level (Example) 

 
Each display position is indicated by a symbol of a 
little man. The service level indicates the 
maximum values and settings of the meter. 
 

 

Absolute maximum flow 
with date 
(averaged) 

 

Absolute maximum flow 
with time 
(averaged) 

 

Absolute maximum 
energy with date 
(averaged) 

 

Absolute maximum 
energy with time 
(averaged) 

 

Absolute maximum 
temperature in the warm 
pipe with date 

 

Absolute maximum 
temperature in the cooling 
pipe with date 

 

Actual date 

 

Actual time * 

Summary of Contents for SENSUS PolluTherm





















Reviews: