Parameter
Description
A4
Total number of times the
A4
(Minimum Pressure) alarm
has been triggered.
A5
Total number of times the
A5
(Pressure Sensor Fault)
alarm has been triggered.
A6
Total number of times the
A6
(Over Temperature) alarm
has been triggered.
A7
Total number of times the
A7
(Short Circuit) alarm has
been triggered.
A8
Total number of times the
A8
(Overvoltage) alarm has
been triggered.
A9
Total number of times the
A9
(Undervoltage) alarm has
been triggered.
Press (6)
to view values greater than 99.
Example:
Total operating hours
HF
= 1250.
+
+
+
+
+
…
HF
12
50
Figure 8: Total operating hours
Total alarm
A2
= 102.
+
+
+
+
+
+
+
+
...
A2
A3
01
02
...
Figure 9: Total alarm
RESET LOGS: Scroll to
A9
log and then press. and hold (4)
to exit the menu. This
resets the counter and alarm log.
5.3 Programming
The controller has two parameter menus that are accessed with a combination of keys:
• BASIC MENU (MB)
• ADVANCED MENU (MA)
NOTICE:
• The controller is delivered already programmed with the default values. Edit the values
according to the type of pump and system.
• If the controller was supplied from the factory with a pump, it has been programmed at
the factory for operation with the pump.
• Incorrect configuration can damage the pump, motor and/or system.
5.3.1 BASIC MENU (MB) parameters
Refer to
on page 16 for an explanation of the buttons on the user
interface.
Use the steps below to enter and navigate the BASIC MENU.
5 System Description
ResiBoost INSTRUCTION MANUAL
19
Summary of Contents for Goulds ResiBoost RB111512
Page 1: ...INSTRUCTION MANUAL IM325 ResiBoost Variable Frequency Controller...
Page 2: ......
Page 39: ......
