Xylem Goulds J Series Instruction Manual Download Page 2

2

Table of Contents

SUBJECT 

PAGE

Selecting the Correct Jet Pump System ............................................................................................................................ 3
Preparing for Installation ..................................................................................................................................................... 4
General Information - Piping .............................................................................................................................................. 4
Shallow Well Installation ..................................................................................................................................................... 4 
Deep Well Twin Pipe ............................................................................................................................................................ 5
Deep Well Packer System ................................................................................................................................................... 5
Deep Well Discharge Piping .............................................................................................................................................. 5
All Systems ............................................................................................................................................................................ 6
Booster Systems ................................................................................................................................................................... 7
Seasonal Service .................................................................................................................................................................. 7
Recommended Deep Well Jet Assemblies and Control Valve Settings ....................................................................8-9
Shallow Well Jet Assemblies For Convertible Pumps ..................................................................................................... 9
Technical Data .............................................................................................................................................................. 10-11
Troubleshooting ................................................................................................................................................................. 12
Goulds Water Technology Limited Warranty ................................................................................................................. 12

Table of Contents

All electrical work must be performed 

by a qualified technician. Always follow 

the National Electrical Code (NEC), or the Canadian 

Electrical Code, as well as all local, state and provincial 

codes. Code questions should be directed to your local 

electrical inspector. Failure to follow electrical codes and 

OSHA safety standards may result in personal injury or 

equipment damage. Failure to follow manufacturer’s 

installation instructions may result in electrical shock, fire 

hazard, personal injury or death, damaged equipment, 

provide unsatisfactory performance, and may void 

manufacturer’s warranty.

Standard units are not designed for use 

in hazardous liquids, or where flammable 

gases exist. Well must be vented per local codes. 

See 

specific pump catalog bulletins or pump nameplate for 

all agency Listings

.

Disconnect and lockout electrical power 

before installing or servicing any electrical 

equipment. Many pumps are equipped 

with automatic thermal overload protection which may 

allow an overheated pump to restart unexpectedly.

Never over pressurize the tank, piping 

or system to a pressure higher than the 

tank's maximum pressure rating. This will damage 

the tank, voids the warranty and may create a serious 

hazard.

Protect tanks from excessive moisture and 

spray as it will cause the tank to rust and 

may create a hazard. See tank warning labels and IOM 

for more information.

This appliance is not intended for use 

by persons (including children) with 

reduced physical, sensory or mental capabilities, or lack 

of experience and knowledge, unless they have been 

given supervision or instruction concerning use of the 

appliance by a person responsible for their safety.

Children should be supervised to ensure 

that they do not play with the appliance.

WARNING

WARNING

WARNING

Important notice: Read safety instructions before 

proceeding with any wiring

SAFETY INSTRUCTIONS                  

TO AVOID SERIOUS OR FATAL PERSONAL  

INJURY OR MAJOR PROPERTY DAMAGE, READ 

AND FOLLOW ALL SAFETY INSTRUCTIONS IN 

MANUAL AND ON PUMP.
THIS MANUAL IS INTENDED TO ASSIST IN THE 

INSTALLATION AND OPERATION OF THIS UNIT 

AND MUST BE KEPT WITH THE PUMP.

This is a 

SAFETY ALERT SYMBOL

When you see this symbol on the 

pump or in the manual, look for one 

of the   following signal words and 

be alert to the potential for personal 

injury or property damage.
Warns of hazards that 

WILL

 cause 

serious personal injury, death or major 

property damage.
Warns of hazards that 

CAN

 cause 

serious personal injury, death or major 

property damage.
Warns of hazards that 

CAN

 cause per-

sonal injury or property damage.

NOTICE:  INDICATES SPECIAL INSTRUCTIONS 

WHICH ARE VERY IMPORTANT AND MUST BE 

FOLLOWED.
THOROUGHLY REVIEW ALL INSTRUCTIONS 

AND WARNINGS PRIOR TO PERFORMING ANY 

WORK ON THIS PUMP.
MAINTAIN ALL SAFETY DECALS.

DANGER

CAUTION

WARNING

WARNING

WARNING

WARNING

WARNING

Summary of Contents for Goulds J Series





































Reviews: