KPM(T) Series Flat Panel Industrial Monitor
Chapter 1 – Introduction
3 143448 (
D
)
mouse/keyboard and USB ports. All keypad keys are reprogrammable
1
, except the
F/A key, and all function keys are relegendable
2
. See Chapter 5 for more details.
Caution
Leaving your TFT LCD display on constantly can result in temporary image retention
(TIR). TIR can be avoided by using a screen saver, enabling the idle/doze timeout
feature, or by turning off the display when it is not in use.
Table 1-1. 5012KPM(T) & 5015KPM(T) Front Panel Controls Functions
Feature
Description
Front Panel
The front panel has four components: a display; strengthened glass
covering the display; a frame in which the display and the glass are
mounted; and the polyester overlay attached to both the glass and the
frame.
The 5012KPM(T) has a 12.1" TFT LCD flat panel. The 5015KPM(T) has a
15" TFT LCD flat panel.
The strengthened glass covering the display is intended to withstand
normal operating conditions. In the event of damage to the glass, the
overlay will protect the user from any glass shards.
For more information abut the frame or the overlay, see Chapter 6 –
Maintenance.
Diagnostic LEDs
Following is a description of the diagnostic LEDs and their meanings:
Power GREEN when the system has power.
Disk
LED is not active on the 5012KPM(T) and 5015KPM(T).
COM
LED is not active on the 5012KPM(T) and 5015KPM(T).
Input
GREEN when the unit has a touch screen (LED gets brighter
when a touch input is detected) or a key is pressed.
Fault
LED is not active on the 5012KPM(T) and 5015KPM(T).
Brightness Control These buttons adjust the brightness of the backlights. The right button
increases the brightness and the left button decreases the brightness.
Port Access
The 5012KPM(T) and 5015KPM(T) feature front panel access to a PS/2
keyboard/mouse port and a USB 1.1 or 2.0 port (depending on capabilities
of the host).
These front access connections on the 5012KPM(T) and 5015KPM(T)
are nonincendive circuits and may be used safely in Class I Division 2,
Groups A, B, C, & D and in Class II Division 2, Groups F & G
applications in which the peripheral electrical characteristics comply
with the Hazardous Locations Control Drawing on page 29.
1
All keypad keys can be programmed to perform any function necessary.
2
You are able to create your own, custom keypad inserts to reflect any reprogramming you may have done.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
