XVision XSD27ZIR, User Manual

Page: 17 / 36

XSD27ZIR
17
■
BOOT-UP SCREEN
<Main Menu>

<System >

<Bootup Screen>
Camera S/N : 8888888888
Camera ID : 001
Baud Rate : 9600bps
Model : …………
Version : 8.01
Outer Temp :022C/071F
System Tem:027C/080F
Call Preset 1 To Back
Bootup screen displays summary information of the dome.
Values are fixed in this sub-menu. Refer to “Bootup Screen”
to check the item. Call preset 1 to return to upper menu.
■
PASSWORD
<Main menu>

<System >

<Password>
Input Password:******
Confirm :******
PSWD Protection: On
Back

<Input Password>
Move the joystick right to enter submenu.
Old Password:******
Back
• < Old Password >
Enter the old password.
•
< Back >
If old password is correct, cursor goes back
behind <Input Password>, so that new password
can be inputted. If old Password is not correct,
cursor goes back to <Input Password>. Password
cannot be changed in this case.

<Confirm>
When and only when the new password is entered,
can the user get to this menu. If the password is not
the same as entered the first time, it remains
unchanged.

< PSWD Protection>
Password protection can be switched on and off.
When it is <On> user need to enter password to
access main menu or save preset through the
keyboard.
NOTE: The dome’s default password is 123456.
Contact the supplier for the master password if the
password is forgotten after changing it.
Select BACK to return to upper menu
■
SET DEFAUT
<Main Menu>

<System Info>

<Set Default>
Select <Set Default> to restore factory default settings.
List of Default Settings
:
Item Default Value
Zoom Speed High
AI/AF Resume Mode Both
AF Resume Time 005
AF Resume Time 005
Iris ALC 084
Iris PlC 016
Day/Night Auto
all display config Off
Frame Limit 1/25
Shutter Off
Exposure Off
White Balance Auto
BLC Level 000
Speed Amplify Off
Proportional P/T On
Pswd Protection Off
Park Time Off
Park Action Off
Arm/Disarm Disarm
Reset Delay 004
■
SYSTEM REBOOT
<Main Menu>

<System >

<System Reboot>
Select <System Reboot> to reboot the dome.
Settings will not change after restarting.