XVision PCC435 User Manual Download Page 58

Page: 58 / 62

9.3 Key Code Table

Key Variable

Key

Code

Description

KN_NOT

0x00

No key function will operate.

KN_TELE 0x01

Perform Zoom Tracking to TELE side by slow speed. In case of displaying

the MENU, it operates as the “MENU selection scroll up“.

KN_HTELE 0x02

Perform Zoom Tracking to TELE side by high speed. In case of

displaying the MENU, it operates as the “MENU selection scroll up“.

KN_WIDE 0x03

Perform Zoom Tracking to WIDE side by slow speed. In case of

displaying the MENU, it operates as the “MENU selection scroll

down“.

KN_HWIDE 0x04

Perform Zoom Tracking to WIDE side by high speed. In case of

displaying the MENU, it operates as the “MENU selection scroll

down“.

KN_FAR 0x08

In the manual focus mode, move the Focus lens to “FAR“ side

quickly. In case of displaying the MENU, it operates as the

“Decrease the data of a selected item on the MENU“.

KN_NEAR 0x09

In the manual focus mode, move the Focus lens to “NEAR“ side quickly.

In case of displaying the MENU, it operates as the “Increase the data of a

selected item on the MENU“.

KN_SFAR 0x0A

In the manual focus mode, move the Focus lens to “FAR“ side by 1 step. In

case of displaying the MENU, it operates as the “Decrease the data of a

selected item on the MENU“.

KN_SNEAR 0x0B

In the manual focus mode, move the Focus lens to “NEAR“ side by 1 step.

In case of displaying the MENU, it operates as the “Increase the data of a

selected item on the MENU“.

KN_STOP 0x0C

Stop all key actions that are being performed currently. After using the key

action, the camera has to be notified by the stop of key action.

KN_BL

0x1A

Switch the BACKLIGHT mode (ON / OFF).

KN_FLICKER

0x1B

Switch the FLICKERLESS mode (ON / OFF).

KN_NEGA

0x1E

Switch the NEGATIVE mode (Negative / Positive).

KN_DZOOM

0x22

Switch the Digital Zoom mode (ON / OFF).

KN_OSD

0x24

Switch the Key function OSD (ON / OFF).

KN_MENU

0x25

Switch the main MENU (ON / OFF).

KN_M_UP

0x27

Increase the data of a selected item on the main MENU.

KN_M_DN

0x28

Decrease the data of a selected item on the main MENU.

KN_POWER

0x32

Switch the power of the Camera (ON / OFF).

KN_R_FAR 0x38

In the manual focus mode, move the Focus lens to “FAR“ side slowly. In

case of displaying the MENU, it operates as the “Decrease the data of

selected item in MENU“.

Summary of Contents for PCC435































































Search results

Summary of Contents for PCC435

Reviews:

Related manuals for PCC435

Brands by name

Popular brands

XVision PCC435, User Manual

Search results

Summary of Contents for PCC435

Reviews:

Related manuals for PCC435

Brands by name

Popular brands