XVision PCC435 User Manual Download Page 40

Page: 40 / 62

Digital Zoom Mode ON/OFF Setting

Switch the Digital Zoom mode to ON or OFF according to the data of “MODE”.

→

Camera

0xC5 0xAA 0x6E MODE CAM_ID C.S.

Camera

→

0xC5 0xAA 0x6E MODE 0x6E 0xXX 0xXX 0xXX C.S.

1. In case of MODE = 0x01, the Digital Zoom Mode is changed to “ON” mode.

2. In case of MODE = 0x00, the Digital Zoom Mode is changed to “OFF” mode.

3. Otherwise, the Digital Zoom Mode remains unchanged.

SCREEN INVERSION (FULL MIRROR) ON/OFF Setting

Switch the SCREEN INVERSION mode to ON or OFF according to the data of

“MODE”.

→

Camera

0xC5 0xAA 0x7F MODE CAM_ID C.S.

Camera

→

0xC5 0xAA 0x7F MODE 0x7F 0xXX 0xXX 0xXX C.S.

1. In case of MODE = 0x01, The SCREEN INVERSION Mode is changed to “ON” mode. In

this case, The Screen is reversed.

2. In case of MODE = 0x00, The SCREEN INVERSION Mode is changed to “OFF” mode.

3. Otherwise, the SCREEN INVERSION Mode remains unchanged.

Caution: This command is

valid

when the Digital Zoom Mode is OFF.

Slow Speed Zoom Tracking External PRESET Move Control

Performs Zoom Tracking PRESET action to the targeted zoom position, memorized in

the volatile PRESET Buffer RAM indicated by the “INDEX” value. In this case, the

Zoom Tracking is performed slowly.

→

Camera

0xC5 0x7B INDEX 0x00 CAM_ID C.S.

Camera

→

0xC5 0x7B INDEX 0x00 INDEX 0xXX 0xXX 0xXX C.S.

INDEX: The index value of the PRESET Buffer RAM taking the target Zoom position.

Caution: The range of the INDEX is from 0x00 to 0x07.

Summary of Contents for PCC435































































Search results

Summary of Contents for PCC435

Reviews:

Related manuals for PCC435

Brands by name

Popular brands

XVision PCC435, User Manual

Search results

Summary of Contents for PCC435

Reviews:

Related manuals for PCC435

Brands by name

Popular brands