9
Refer to Remote
Control Interface
DC 12V IN
TELE
FAR
NEAR
MENU
WIDE
ON/ OFF
90.3 0.5mm
6
5
0.
5mm
150
2
0
mm
30
00
12
0mm
Day & Night Output
This function will turn on the external IR LED lamp according to the position of IR cut filter.
Day & Night Output
5V / 10mA:
IR LED ON (NIGHT)
0V:
IR LED OFF (DAY)
Day & Night External Input
When Day & Night mode is set to "External" on the OSD menu of the camera, this
function will be switched to DAY mode or NIGHT mode according to the Day & Night
signal from the external light sensor or the IR LED lamp.
Day & Night External Input
Open
Contact:
DAY
Close Contact (Close to GND):
NIGHT
(8). Wire Remote Controller (optional)
：
30 meter cable, refer to figure 5-6, 5-7, 5-8
Button Name
Function
Tele/
S
Zoom Tele or Up (
S
)
Wide/
T
Zoom Wide or Down (
T
)
Near/
＋
Focus Near or Increase (
＋
)
Far/
－
Focus Far or Decrease (
－
)
Menu
Enter or Exit Setup Menu
ON/OFF Power
On/Off
Figure 5-6
Summary of Contents for PCC435
Page 61: ...61 MEMO ...
