WARNING: This symbol is intended to alert the user to the presence of un-insulated “dangerous
voltage”.
CAUTION: This symbol is intended to alert the user to presence of important operating and
maintenance (Servicing) instructions in the literature accompanying the appliance.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other
European countries with separate collection systems).
This symbol on the product or on its packaging indicates that this product shall not be treated as
household waste. By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. The recycling of materials will help to conserve natural
resources. For more detailed information about recycling of this product, please contact your local city
office, your household waste disposal service or the shop where you purchased the product.
Do not touch the zoom lens directly with your hands or fingers. Clean the zoom lens using soft cloth
moistened with alcohol to wipe off any dust.
Please be extra careful not to shake the product and avoid places where frequent vibrations or shocks
may occur.
Do not install the product in extreme temperature conditions.
Only use the camera under conditions where temperatures are between -10‡ and +50°.
Do not install the product in an environment where the humidity is high.
Do not spill liquid of any kind on the product.
If it gets wet, wipe it dry immediately. Alcohol or beverage can contain minerals that corrode the electronic
components.
When minimum brightness of 0.01 Lux cannot be achieved during the night, please install appropriate
light fixtures.
If any abnormal operation or accident occurs,. disconnect the device and contact your dealer or the
nearest service center.
Do not simultaneously connect to the DC 12V IN Jack (from the power source connector) and the DC 12V IN
(from the 6-pin Mini-DIN connector), as error may occur.
3
1. SAFETY PRECAUTIONS
C AUT IO N :
TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT OPEN COVERS (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
It is advised to read the Safety Precaution Guide through carefully before operating the product, to
prevent any possible danger.
Summary of Contents for PCC435
Page 61: ...61 MEMO ...
