Xtreme XR1255 Operation And Safety Manual Download Page 5

Page: 5 / 82

Operation Manual

Introduction

This Operation and Safety Manual provides the information

needed to safely operate the XR1255 Reach Forklift.
This manual should be considered a permanent part of the

forklift, and kept in the protective manual case located in the

operator’s cab.

Before operating the forklift, read this manual complete-

ly and carefully to understand the safety instructions

and the operation of controls and safety equipment. You

must comply with all DANGER, WARNING, and CAUTION

notices. They are for your benefit.

Improper operation of this forklift could result in death or

serious injury.
BEFORE starting the engine, do the following:
•

Read the Operation and Safety Manual

•

Read all the Safety Labels on the Forklift

•

Clear the area of all other persons

Learn and practice safe use of forklift controls in a safe,

clear area, BEFORE you operate this forklift on a work site.

It is your responsibility to observe applicable laws and

regulations and to follow manufacturer’s instructions on

forklift operation and maintenance.

Replacement manuals for the XR1255 Reach Forklift can be

obtained by contacting our parts department by phone or

visiting our website:

Xtreme Manufacturing

Phone: (800) 497-1704

www.XMFG.com

When contacting our parts department, please have the

forklift serial number available. The serial number plate is

located in the operator’s cab, at the base of the seat.

For easy reference, you can record the serial number in the

space below.

Serial Number:

Fig 1. Serial Number Plate

Right side, left side, front, and rear are directional references

given from the operator’s seat when facing forward.

Fig 2. Forklift Direction Orientation

Warning

Notice

ONT

REAR

RIGHT

LEFT

General

Replacement Manuals

Model / Serial Plate

Orientation

Summary of Contents for XR1255



















































































Search results

Summary of Contents for XR1255

Reviews:

Related manuals for XR1255

Brands by name

Popular brands

Xtreme XR1255, Operation And Safety Manual

Search results

Summary of Contents for XR1255

Reviews:

Related manuals for XR1255

Brands by name

Popular brands