Xtreme XR1255 Operation And Safety Manual Download Page 46

Page: 46 / 82

Operation Manual

Operator Cab

Figure 48. Frame Sway Control Handle

Frame Sway Control Handle

Function

Purpose

Frame sway right

Move handle right

Frame sway left

Move handle left

NOTE:

Lock the frame sway by placing the travel select lever

in NEUTRAL or applying the service or parking brake.

NOTE:

Maximum frame sway is 220 overall or 110 each

direction, left and right.

Warning

The forklift includes a Frame Sway Override

switch. Improper use of the Frame Sway

Override switch could cause death, serious

injury, or property damage.

Auxiliary Attachment Control

The Auxiliary Attachment Control lever controls the functions

of approved optional attachments that can be mounted to

the forklift and require hydraulic supply for operation.

Figure 50. Auxiliary Attachment Control Lever

Windshield Washer and Wiper Switch

Figure 49. Frame Sway Control Handle

The frame sway feature becomes locked and will not operate

when the boom is raised 40° or more. Pressing the Frame

Sway Override switch (the trigger) on the control handle will

override the lockout feature and allow slow frame sway.

Flip the toggle switch to WASH to spray windshield washer

fluid onto the windshield; flip the switch to ON to turn the

windshield wiper on. The OFF position turns the wiper off.

Figure 51. Windshield Washer and Wiper Switch

Summary of Contents for XR1255



















































































Search results

Summary of Contents for XR1255

Reviews:

Related manuals for XR1255

Brands by name

Popular brands

Xtreme XR1255, Operation And Safety Manual

Search results

Summary of Contents for XR1255

Reviews:

Related manuals for XR1255

Brands by name

Popular brands