Xtreme XR1255 Operation And Safety Manual Download Page 74

Page: 74 / 82

Operation Manual

Lockout / Tagout

Do Not Operate - Accident Prevention Tags

Before beginning any maintenance or service, place a Do Not

Operate Tag on both the starter key switch and the steering

wheel, stating that the forklift should not be operated. Do Not

Operate Tags, which can be cut out and used, are included at

the end of this manual. Retain these Tags for use at a later

date.

New or Additional Operators

At the time of original purchase, the purchaser of this forklift

was instructed by the seller on its proper use. If this forklift is

to be used by an employee or is loaned or rented to someone

other than the purchaser, make certain that the new operator

is trained, in accordance with OSHA regulations, and reads and

understands this Operation & Safety Manual before operating

the forklift.

In addition, make sure that the new operator has completed

a walk-around inspection of the forklift, is familiar with all the

labels on the forklift, and has demonstrated the correct use of

all controls.

Lockout/Tagout Procedure

Perform the following procedure to lockout and tag out the

forklift. This procedure, requiring a lock, and danger tags are

to be used whenever the forklift is unsafe for operation or

maintenance.

Removing Forklift From Service

Attach “DO NOT OPERATE” tags to steering wheel and

ignition key.

Open battery access cover.

Set battery disconnect switch to OFF.

Lock battery disconnect switch.

Attach “DO NOT OPERATE” tag to battery disconnect switch.

Figure 97. Battery Disconnect Switch

Warning

If forklift is unsafe for operation or maintenance, the defect

or defects must be clearly documented and posted in a

conspicuous place on the forklift. Failure to comply could

result in death, serious injury, or property damage.

Return Forklift to Service

When the forklift has been repaired and made safe for

operation and maintenance, perform the following procedure

to return forklift to service.

Remove lock and “DO NOT OPERATE” tag from battery

disconnect switch.

Close battery access cover.

Remove “DO NOT OPERATE” tags from steering wheel and

ignition key.

Figure 98. DO NOT OPERATE Tag

Summary of Contents for XR1255



















































































Search results

Summary of Contents for XR1255

Reviews:

Related manuals for XR1255

Brands by name

Popular brands

Xtreme XR1255, Operation And Safety Manual

Search results

Summary of Contents for XR1255

Reviews:

Related manuals for XR1255

Brands by name

Popular brands