Xtreme Power Conversion Corporation
Web/SNMP Cards
Page 15
UPS Management
SMTP command group
The smtp command group allows to configure the e-mail sending functionality for e-mail notification of
UPS events and alarms:
Command
Parameters
Description
showsmtp
Show detailed e-mail settings
email-alert
on | off
Enable/disable email functionality
on
E-mail alert enabled
off
E-mail alert disabled
smtp-timeout
[seconds]
Set timeout for TCP communication with SMTP server
[seconds]
Timeout in seconds (range 5-60 seconds)
smtp-server
[hostname]
Set SMTP server address
[hostname] hostname/IP-address of the SMTP server
NOTE
: using hostnames requires DNS connection.
email-authen
on | off
Enable/disable authentication for email server
on
E-mail server requires authentication
off
E-mail server does not require authentication
email-account
[user]
Set email server account
[user] Username for e-mail server authentication
email-passwd
[pwd]
Set email server password
[pwd] Password for e-mail server authentication
smtp-sendername
[sender]
Set the ‘mail from:’ header
[sender]
E-mail address (63 chars max)
NOTE:
This may be a critical parameter, as some SMTP serv-
ers require a valid sender address within a specified domain.
Confirm the exact requirement with your service provider or
IT function.
addrcpt
[e-mail]
Add a recipient address
[e-mail] E-mail address (63 chars max)
NOTE
: Maximum 8 recipients can be defined.
delrcpt
[e-mail]
Delete a recipient address
[e-mail] E-mail address (63 chars max)
sendemail
[msg]
Send a test mail
[msg] Test message to be send
