Xtreme Power Conversion Corporation
Web/SNMP Cards
Page 12
UPS Management
User command group
The user command group is available only to the supervisor user, the only user who can perform user manage-
ment.
Command
Parameters
Description
supername
[name]
Change supervisor login name
[name] New supervisor username
NOTE
: By default, the superuser is the only configured user
with username and password set to ge and ge.
showuser
Show user settings
adduser
[user]
[http]
[telnet]
[ftp]
[access]
Add a user
[user] username for the new user
[telnet] 1 – access allowed / 0 – not allowed
[http] 1 – access allowed / 0 – not allowed
[ftp] 1 – access allowed / 0 – not allowed
[access] „ro‟ – read-only / „rw‟ – read/write
NOTE:
After entering the command, the console prompts for
the password, which needs to be re-confirmed.
Mind that the password length is limited to 8 chars.
The command line interface may accept longer passwords,
although only the first 8 characters are significant.
deluser
[name]
Delete a user
[name] User to be deleted
moduser
[user]
[http]
[telnet]
[ftp]
[access]
Modify services and access rights for a user
[user] username for the new user
[telnet] 1 – access allowed / 0 – not allowed
[http] 1 – access allowed / 0 – not allowed
[ftp] 1 – access allowed / 0 – not allowed
[access] „ro‟ – read-only / „rw‟ – read/write
NOTE
: The indicated services refer to the following access methods:
http
Web interface
Controls access with both HTTP and HTTPS protocols
telnet
Remote console interface
Controls access with both Telnet and SSH (Secure SHell)
protocols plus SFTP (Secure FTP)
ftp
File transfer
Controls access with FTP
NOTE
: Both username and passwords are case sensitive. It is recommended to always use lower case for both.