Xtreme Power Conversion Corporation
M90S-4S User’s Manual
Page 8
Uninterruptible Power Supply
2.4 Moving the Cabinet
The UPS is screwed to the pallet with 2 mounting brackets. When removing it, pay attention to the movement of
the casters to avoid accidents. The cabinet can be pushed forward or backward only. Pushing it sideward is not al-
lowed. When pushing the cabinet, pay attention to the gravity center so as not to turn over the UPS.
1.
If you need to move the UPS over a long distance, please use appropriate equipment like a forklift. Do not use
the UPS casters to move over a long distance.
2.
After the UPS has been removed from the pallet to the floor, we suggest that at least three people move the
UPS to the installation area. One person holds a lateral side of the UPS with hands, another holds the other
lateral side of the UPS with hands, and the other person pushes the UPS either from the front side or from the
back side to the installation area to avoid tipping the UPS.
3.
The casters are designed to move on level ground. Do not move the UPS on an uneven surface. This might
cause damage to the casters. Toppling the UPS could also damage the unit.
4.
Ensure that the weight of UPS is within the designated bearing capacity of any handling equipment.
5. At the bottom of the UPS, the four casters help you to move the UPS to a designated area. Before you move the
UPS, please turn the four leveling feet counterclockwise to raise them off the ground. This protects the leveling
feet from damage when moving the UPS.
