Xtreme Manufacturing XR630 Page 34 Operation And Safety Manual Download

Page: 34 / 78

Operation Manual

XR630

Operator Cab

Display Indicators

Fig 23. Display Indicators

When the transmission is in Neutral, the Transmission Shift In-

dicator highlights (N).

D. TRANSMISSION RANGE INDICATORS

The machine starts up with the transmission in High Range

mode, and the rabbit icon is displayed at B. Select the desired

mode by touching B to switch between Low Range depicted

by a turtle icon, and High Range (rabbit icon).

The Low Range mode is used for climbing steep grades, or

whenever slow speed is desired. The High Range mode adapts

to driving conditions and allows for higher speed travel.

E. WAIT TO START

The Wait to Start Indicator is displayed when the key switch is

moved to the RUN position. Wait until the indicator goes out

before starting the engine.

F. ENGINE SHUTDOWN

The Engine Shutdown Indicator will be displayed when there

is a serious engine fault and the engine should be shut down.

Automatic shut down is imminent.

The display allows the operator to view vital engine

information and other critical functions, including gauge

display, engine diagnostics to monitor engine condition and

performance, fault codes, and warning indicators.

A. PARKING BRAKE

The Parking Brake Indicator will be displayed when the

parking brake is applied.

B. STEERING SELECT INDICATOR

Displays the steering mode selected. The Telehandler includes

three

STANDARD

modes of steering:

•

Two Wheel (2W)

•

Four Wheel (4W)

•

Crab Steering

C. TRANSMISSION SHIFT INDICATOR

The transmission has two forward (F) and two reverse (R)

modes. It also can operate in High Range or Low Range mode.

Summary of Contents for XR630















































































Search results

Summary of Contents for XR630

Reviews:

Related manuals for XR630

Brands by name

Popular brands

Xtreme Manufacturing XR630, Operation And Safety Manual

Search results

Summary of Contents for XR630

Reviews:

Related manuals for XR630

Brands by name

Popular brands