Xtreme Manufacturing XR630 Page 59 Operation And Safety Manual Download

Page: 59 / 78

Operation Manual

XR630

Operation

Standard Carriage Operation

The standard carriage uses manually adjustable forks and can

be tilted up or down by using the thumb stick on the control

handle.

Fig 78. Attachment Tilt Control Switch.

(A) Attachment Tilt Down (B) Attachment Tilt Up

Quick Attach System

This Telehandler includes a quick attach system that allows for

easy attachment changes. Perform attachment connection

and removal procedures on level ground.

Warning

Improper connection of an auxiliary

attachment can result in death or serious

injury. Attachments not locked into place

could become unstable and fall on the

operator or other personnel near the

Telehandler, which could result in death or serious injury.

•

Make sure attachment locking devices are always in

place.

•

DO NOT operate the Telehandler until you have positive

indication that the carriage attachment is fully engaged.

Attachment Connection

Position the Telehandler directly behind the attachment.

NOTE:

Allow enough distance to extend the boom

approximately 18 to 20 inches (0.4 to 0.5 meters).

Fig 79. Drive Vehicle Forward to Align Pivot Pins (A) with Attachment

Hooks (B)

Tilt the quick attach adapter forward.

Extend the boom and/or drive the Telehandler forward

until the pivot pins (A) are below and between the two (2)

attachment hooks (B).

Summary of Contents for XR630















































































Search results

Summary of Contents for XR630

Reviews:

Related manuals for XR630

Brands by name

Popular brands

Xtreme Manufacturing XR630, Operation And Safety Manual

Search results

Summary of Contents for XR630

Reviews:

Related manuals for XR630

Brands by name

Popular brands