Xtreme Manufacturing XR630 Page 49 Operation And Safety Manual Download

Page: 49 / 78

Operation Manual

XR630

Operation

Functional Tests

Warning

Perform a pre-operation inspection and func-

tional tests at the beginning of each work

shift. Perform the pre-operation inspection

first. DO NOT perform the pre-operation

inspection with the engine running or hot.

Contact with moving or heated parts could cause death or

serious injury.

Perform the pre-operation inspection and

functional tests in an open area and away

from any other obstacles or equipment. In-

spections and functional tests may require

assistance. Keep the assistant visible and a

safe distance from the Telehandler to prevent death or se-

rious injury.

Remove Telehandler from service and place

“Do Not Operate” tags on the starter switch

and steering wheel if anything is found to be

in need of repair or maintenance, defective,

or unsafe in any way.

The safety, efficiency, and service life of your Telehandler

will be increased by performing functional tests at the

beginning of each shift. If any of the items in the functional

tests are not operating properly or within set tolerances,

stop the Telehandler, follow proper shut down procedures,

tag the Telehandler with “Do Not Operate” tags, and have a

qualified mechanic service or repair the Telehandler before

placing it into service again.

Release the parking brake.
Operate the Telehandler in forward and reverse.
Test the service and parking brakes.

•

Apply the service brake pedal after the Telehandler

begins to move and the Telehandler should stop

immediately.

•

Apply the parking brake. The Telehandler should
not move unless the parking brake is released.

Test each steering function. Operate the Telehandler in

forward and reverse at low speed and turn the steering

wheel approximately 1/2 turn in each direction for each

of the following modes:

•

Align the wheels and set the Steering Select switch

to crab steering.

•

Align the wheels and set the Steering Select switch

to 2 wheel (2W) steering.

•

Align the wheels and set the Steering Select switch

to 4 wheel (4W) steering.

Check the gauges on the display after the engine warms

to the proper operating range.

•

Check the voltage gauge. The voltage gauge

should read between 12.5 to 14 Volts.

•

Check the engine coolant temperature gauge. The

engine coolant temperature gauge should read be-

tween 180

to 200

•

The Oil Pressure Indicator will be displayed when

the engine oil pressure is below normal. If the

Oil Pressure Indicator comes on during normal

operation, stop the Telehandler, follow proper

shut down procedures, tag Telehandler with “Do

Not Operate” tags, and have a qualified mechanic

service or repair the Telehandler BEFORE placing it

into service again.

Operate the joystick forward and backward to lower

and raise boom.
Operate the joystick left and right to retract and extend

boom.
Operate the attachment tilt thumbstick up and down to

tilt the attachment.
Operate the auxiliary attachment control if an auxiliary

attachment is being used.
Turn work lights on and off.
Press the horn button to sound the horn.
Place the travel select lever in reverse to sound the

backup alarm.

NOTE:

The enable trigger must be actuated for boom

functions to operate.

Summary of Contents for XR630















































































Search results

Summary of Contents for XR630

Reviews:

Related manuals for XR630

Brands by name

Popular brands

Xtreme Manufacturing XR630, Operation And Safety Manual

Search results

Summary of Contents for XR630

Reviews:

Related manuals for XR630

Brands by name

Popular brands