Xtreme Manufacturing XR1147 Operation And Safety Manual Download Page 37

Page: 37 / 76

Operation Manual

Operator Cab

Display Indicators

The display allows the operator to view vital engine

information and other critical functions.

Figure 29. Display Indicators

A. HIGH HYDRAULIC OIL TEMP
The hydraulic oil temperature indicator illuminates when the

oil temperature is above 1800 F (820 C). If the hydraulic oil

temperature indicator illuminates, stop and idle the engine

to allow time for cooling. If the hydraulic oil temperature

indicator does not go out after five (5) minutes, stop the

Telehandler, follow proper shut down procedures, tag the

Telehandler with “Do Not Operate” tags, and have a qualified

mechanic service or repair the Telehandler BEFORE placing it

into service again.
B. WATER IN FUEL
The Water in Fuel Indicator will be displayed when water is

detected in the fuel filter. Drain the water by opening the

petcock on the bottom of the fuel filter.
C. LOW BRAKE PRESSURE
The Low Brake Pressure indicator illuminates if the hydraulic

oil pressure gets too low. If the Low Brake Pressure indicator

is illuminated, do not release the parking brake or engage

transmission until the indicator is out. If the indicator does

not go out, stop the Telehandler, follow proper shut down

procedures, tag Telehandler with “Do Not Operate” tags, and

have a qualified mechanic service or repair the Telehandler

BEFORE placing it into service again.
D. LOW OIL PRESSURE
The Low Oil Pressure Indicator will be displayed when the

engine oil pressure is below normal (below10 psi). If the Oil

Pressure Indicator comes on during normal operation, stop

the Telehandler, follow proper shut down procedures, tag

Telehandler with “Do Not Operate” tags, and have a qualified

mechanic service or repair the Telehandler BEFORE placing it

into service again.
E. LOW COOLANT LEVEL
The Low Coolant Level Indicator will be displayed when the

coolant level in the surge tank drops below normal. Add

coolant to the top of the sight gauge of the surge tank.

Summary of Contents for XR1147













































































Search results

Summary of Contents for XR1147

Reviews:

Related manuals for XR1147

Brands by name

Popular brands

Xtreme Manufacturing XR1147, Operation And Safety Manual

Search results

Summary of Contents for XR1147

Reviews:

Related manuals for XR1147

Brands by name

Popular brands