VESDA Sensepoint XCL – Large Bore Installation Manual
VESDA
16
www.xtralis.com
2.10 Securing the Detector Module and Flow Cap
1.
Position the detector module with Flow Cap onto the back box ensuring that the status indicator is in the
top left-hand corner when viewed from the front. Tighten the four retaining screws using a No. 2 Phillips
screwdriver to secure.
CAUTION:
Do not over-tighten the screws. If required, the current sink/source selection switch can be set at this
point.
2. Where used, tighten the sealing nut of the cable gland to secure the cable.
Summary of Contents for VESDA Sensepoint XCL
Page 2: ......