22
TRACE DUPLICATION
Trace Duplication is a key learning & cutting method which the probe detects the track for the entire key and cut a key with
exact the same shape with the original one. An original key is required for this process.
T
o do this, select “Trace Duplication” on the main menu, then this will show up.
S
elect the type of the key first. After that, refer to the picture below and install the original key on the jaw, click “Copy” to
start learning the key.
After learning, the shape will be shown on the bottom-right corner of the screen. Take a comparison with the original one,
then install the key blank, click “Processing” to start cutting.
Note: Trace Duplication will also copy the wear of the ori
ginal key. We don’t suggest copying old keys with this
process
– the cut key might not be usable.
4.
C
ALIBRATION
&
T
ESTS
To keep the machine precise, KNC91 requires calibrations at irregular intervals. When you find the key that has been cut is
not
accurate, or the motors are not working correctly, please go to “Machine Calibration” menu and do some tests and
calibrations.
Caution: Calibration and tests can help you fix and locate some of the problems that happened to the machine.
Please contact your dealer or Xtool customer services if the problem happens consistently.
Note: Due to some unpredictable issues, there are chances that the screen stuck in testing process. There will
be a notice show up in the process, click and hold the text to stop testing.
DEVICE INFORMATION
Here you can check the basic information of the machine and do some changes for some of the parameters.
Summary of Contents for AnyCut KNC91
Page 31: ...29...
