I
Please read this user manual carefully before using Anycut KNC91 Key Cutting Machine, referred to as the
“KNC91”
throughout this document
. When reading the manual, please pay attention to the words “Note” or “Caution” and read them
carefully for appropriate operation. Due to technical updates, software update, etc., some of the pictures shown on the
manual might not be fully accurate. Product images and description only for reference purpose, so please see the subject
produce.
O
PERATION
I
NSTRUCTIONS
⚫
Make sure that the machine is operated under a safe environment.
⚫
Wear a pair of goggles that matches the ANSI safety standards during operation.
⚫
Keep away from children.
⚫
Avoid using compressed air or any blower of any kind to clean the machine.
⚫
Avoid contact of any kind with the machine during operation.
⚫
Always pay attention to the machine during operation.
⚫
Do not attempt to dissemble the machine or fiddling with the Li-iON battery inside.
⚫
Disconnect the power supply to the machine prior to storage.
⚫
Avoid humid/greasy/dusty area and keep the machine away from heat and never expose it to direct sunlight.
⚫
Only operate the machine on a leveled bench.
⚫
Keep the machine dry and clean at all times
。
⚫
SHUT DOWN THE POWER IMMEDIATELY if any abnormalities are detected.
M
AINTENANCE
T
IPS
⚫
Always keep clean from any debris in order to maintain the performance and the precision of the machine!
⚫
Avoid using oil or chemical based products to clean any part of the machine as it may damage or corrode parts!
⚫
Always check the fastener of the key cutting machine and make sure they are tight as they should be!
⚫
Replace and Adjust parts that is worn or damaged on time
.
⚫
We suggest a through monthly check of the performance and status of the machine.
A
FTERSALES
-S
ERVICES
XTOOL strives to provide best-in-class support!
E-Mail:
|
Tel: +86 755 21670995 or +86 755 86267858 (China)
Official Website:
Alert!!!: Please read the operation instructions below carefully prior to usage. Improper operation will cause
damage or even death to you and to the machine!
2.
Summary of Contents for AnyCut KNC91
Page 31: ...29...
