19
CUSTOMIZE KEY PROFILE
In some cases you may seen some keys that have never seen before and not shown inside our database. With a set of
calipers, a key or a fully assembled cylinder, you can customize a new key profile, cut it, and share to others.
To do that, click “Customize key profile” , and this menu will show up.
If you have made any key profiles or saved any shared contents, the profile will be shown on the left of the screen. Click to
start processing with this profile and
hold to modify it. Click “Add” on the bottom-right corner to make your own key profile.
If you try to modify or add a new key profile, this screen will appear. Please select the key biting type below.
The diagrams show how the key roughly looks like. The red line on the diagram indicates where the key should be aligned
with the jaw (tip/shoulder).
The next step requires the dimensions of the key profile. Now please take the caliper and measure the keys, then enter the
data.
Summary of Contents for AnyCut KNC91
Page 31: ...29...
