17
Enter the codes for 3 sides, or start learning to get the codes.
We will start from cutting side A. To do that, align the key blank to jaw K2/K4, side A, line 1. This process is the same as
cutting normal inner groove keys.
When side A is done and side B/C needs to be processed, find another HU162T key blank and clamp both on jaw K2/K4,
side A, line 1 (see picture below). The key that needs to be cut should be side upwards.
Make sure the keys are clamped tightly on the jaw. Click OK to start processing.
TIPS ON CUTTING KEYS
1) KNC91 requires biting codes to cut the keys. Other than learning, filling or searching codes from our database, you can
also recognize the codes by eye-checking the original key, or by picking the lock using specific tools.
2) Sometimes there are
some tips (materials that haven’t been cut) on the key after cutting. We suggest using a file to trim
the keys after that.
3) Make sure the key is clamped flatly on the clamp, avoid tilting the key.
4) Make sure you are selecting the correct cutter size before cutting, and the machine must be well calibrated before
operations.
5) Use the brush to clean the jaw, probe, cutter and bench every time you finished cutting.
Summary of Contents for AnyCut KNC91
Page 31: ...29...
