1
2
1. Slide lock button
2. Safety Cover
Installing or removing the whole
assembled vacuum tube
To install the whole assembled vacuum tube
onto the tool, perform as follows:
1. Pull the slide lock button forward and
keep the safety cover open.
2. Attach the whole assembled vacuum tube
by hooking it directly onto the tool body.
2
1
1. Rod
2. Hook
3. Whole assembled vacuum tube
4. Tool body
4
3
3. Release the safety cover. Pull
the slide lock button forward until
the vacuum tube fully inserted into
tool. Then release the button to
lock on again.
1
2
3
4
1. Lock Button
2. Dust Bag Nozzle
3. Blower outlet
4. Dust bag
1
2
1. Hook
2. Hole
To remove the whole assembled vacuum
tube , perform the installation procedure in
reverse.
CAUTION: Always secure the roller firmly.
Otherwise the roller may come off during
operation and may cause an personal injury.
Installing or removing the dust bag
Pro
To install the dust bag onto the tool
1. Slide the dust bag nozzle and then push it
in onto the blower outlet of the tool directly
until the lock button go back to the original
position.
To remove the dust bag, perform the
installation procedure in reverse.
2. Připojte druhou část prachového vaku na
otvor na trysce vysavače.
