Assembly for vacuuming
Assembling the vacuum tube
To assemble the vacuum tube , perform as follows:
1. Align the protrusions on the upper part of
vacuum tube with the sliding grooves on the lower
part of vacuum tube and then slide it onto the lower
part of vacuum tube.
1
2
1. Lower part of vacuum tube
2. Upper part of vacuum tube
1
1. Star bolt
2. Secure the vacuum tube with two star bolt by turning the bolt clockwise.
To disassemble the vacuum tube , perform the installation procedure in reverse.
CAUTION: Always make sure to secure the vacuum tube firmly. Otherwise it may cause an
accidental personal injury
Installing or removing the roller
To install the roller onto the vacuum tube, perform
as follows:
1. Align the protrusions on the vacuum tube with the
sliding grooves on the roller and then slide the roller
onto the vacuum tube with the position your desired.
3
1
2
4
1. Roller
2. Sliding groove
3. Protrusions on the vacuum tube
4. Vacuum tube
1
2
1. Nut
2. Fastening hole
2. Put the nut onto the fastening hole, press and
hold it.
3. Then insert the clamping screw into the fastening
hole from the other side and secure it by turning it
clockwise.
2
1
1. Clamping screw
2. Fastening hole
CAUTION: Always secure the roller firmly. Otherwise
the roller may come off during operation and may
cause an personal injury.
