Speed adjust
Rychlost je možné nastavit otáčením volitelného
přepínače na požadovanou číselnou hodnotu v rozmezí
1 až 6. Nastavení vyšší rychlosti je docíleno nastavením
přepínače na hodnotu 6. Pro vysvětlení nastavení
jednotlivých hodnot na přepínači ve vztahu ke skutečné
rychlosti využijte tabulku níže.
1
1. Speed adjusting dial
Number
Speed
5~6
High
3~4
Medium
1~2
Low
NOTE: The dial cannot be turned directly from 1 to 6 or from 6 to 1. Forcing the dial may
damage the tool. When changing the dial direction, always turn the dial moving it through
each intermediate number.
OPERATION
CAUTION: Do not place the machine on the ground while it is switched on. Sand or dust
may enter from suction inlet and cause a malfunction or personal injury.
Blower operation
CAUTION: When performing the blower operation, be sure to remove the dust bag and
vacuum tube from the machine, and attach the blower nozzle in place for blowing.
Hold the machine firmly with a hand and perform the blowing operation by moving it
around slowly. When blowing around building, big stone or vehicle, direct the nozzle away
from them. When performing an operation in a corner, start from the corner and then move
to wide area.
Vacuuming operation
CAUTION: When performing the vacuuming operation, be sure to attach the dust bag and
vacuum tube in place to the machine.
CAUTION: Check the dust bag frequently for wear or deterioration.
CAUTION: Be sure to fasten the fastener of the dust bag before operating the machine.
CAUTION: Always switch off the machine before opening or fastening the fastener of the
dust bag.
NOTICE: Do not allow wet materials, such as wet leaves, and foreign materials, such as
large wood chips, metals, glass, pebbles, etc., to be sucked into the machine. Otherwise, a
malfunction may occur.
NOTICE: Empty the dust bag before it becomes full. Otherwise, a malfunction may occur.
Hold the tool firmly. The tool is provided
with both a main soft handle and a front
auxiliary handle. Use both to best grasp the
tool. While operating the machine, adjust the
speed adjust dial so that the suction force is
appropriate for the work location and
conditions. As shown in the figure, you can
use the roller to move the vacuum for easy
and efficient working.
1
2
1. Auxiliary handle
2. Main Soft Handle
