Page 93
§
5.2 IP Address Setup
For constructing a DEDICATED LAN for IP system, all network devices must be set to different IP
Address.
•
Network device model includes C5-IPC, DPG-IP-G21 and CM-IPC and PC Station.
•
All network devices can be detected by IP8210 Config and IP-Device, but only C5-IPC and IP-
G21 and CM-IPC can be set by these two software. PC Station is set by Windows IP setup.
5.2.1
General Rules for IP Address Setup
All the devices must be in the same IP Segment.(We use the segment: 192.168.0.X in this manual )
1.
192.168.0.1 is used as a network gateway. Devices can’t be set to this address
2.
All devices must be set a unique IP address & MAC address
3.
If more than one device have the same IP address, only one of them can be available by
IP8210-config or IP-Device.
4.
If PC & the device to be set to have the same IP, the device can’t be detected by IP8210 Config
or IP-Device software
5.
Here are the table for range of device IP address
Range
Device
192.168.0. 2
– 192.168.0. 240
C5-IPC
192.168.0.241
– 192.168.0.246
PC Station(IP-Agent)
192.168.0.247
– 192.168.0.254
Guard Station(DPG-IP-G21)
5.2.2
IP Address Setup by IP8210-Config
The IP8210-config is a tool to set the IP address of C5-IPC. For new C5-IPC, IP address of devices are
initialized to the same address(192.168.0.2) ,so it’s recommended that the IP address of devices be
set one by one. It’s easily fulfilled via IP8210-Config software.
5.2.2.1
Set PC IP address
Assume that IP of PC is set to 192.168.0. 242
1.
See the notification area in the right lower corner of
windows desktop
Summary of Contents for CAT-5 wired
Page 1: ...CAT 5 video intercom system Technical guide...
Page 10: ......
