xsto CT420S, Operation Manual

Page: 35 / 58

31
the track walking mode and
manual adjustment mode. And
when the tracks land on the floor,
the floor walk mode can be
launched.
NOTE: When the loading board angle is automatically adjusted,
the speed of going up and down the stairs will be automatically
reduced to ensure safe going up and down. When the automatic
balance adjustment is completed, the original speed will be restored.
Under the automatic adjustment mode of the loading board, in the
initial stage of going upstairs, only the joystick needs to be controlled,
and no other operation is needed
.
3.8 Turning operation on flat ground or platform
Press "M" key on the hand-held controller to switch the climbing
machine to the loading board manual adjustment mode. Operate the
joystick to lift and flip the load board, slightly increase the center of
cargo’s gravity, until the casters completely go off the ground. Then,
press "M" key again to switch to the track walk mode, and use the
joystick to turn left or right. When the steering is completed and ready
to go up or down the stairs, follow the previous instructions for going
up and down stairs.