xsto CT420S, Operation Manual

Page: 25 / 58

21
3.5.2 Change the automatic adjustment angle of the loading board
Mode 1: Under the manual
adjustment mode of the loading
board, the state of
hand-held
Controller is shown in the picture,
manually adjust the turning angle
of the loading board to a proper
angle by operating the Joystick,
then switch to automatic
adjustment mode ,CT420S will
memorize the angle of the
loading board automatically .
As shown in the upper left corner
of the left figure, when the
symbol light marked by red
wireframe light up, it indicates
that the loading board of the
CT420S automatic adjustment
mode is working. When in manual
adjustment mode, the symbol
light goes out.