xsto CT420S, Operation Manual

Page: 32 / 58

28
3.7.1 Start the CT420 S stair climber
Insert the 24V battery pack and
turn on the battery switch
Note: Before turning on the
battery switch, make sure the
battery is inserted in the battery
holder and the power cord is
connected well.
Turn on the hand-held controller
switch
3.7.2 Initial position
To move the CT420S stair climbing
machine to the edge of the platform
on the stairs, set the CT420S to the
automatic adjustment mode of load
board with the
hand-held controller,
set the speed to 1st gear, and use the
track running mode to go down the
stairs.
Press the automatic extension