XSPC RayStorm, Manual

Page: 15 / 18

Finishing Touches
Maintenance
2. Connect the fans to the motherboard fan headers,
or a fan controller.
1. Connect the tachometer output from the pump to
the motherboard fan header. This will allow you to
monitor the pumps speed. (D5 Pump only)
4. Push the 5mm LED into the LED holder and connect
the LED to the PSU. 3. Push the two 3mm LEDs into the LED holders and
connect the LEDs to the PSU.
5. The dial on the back of the pump can be used to
set the pump speed. 5 being full power and 1 being
the lowest noise level. (D5 Pump only)
If installed correctly, the watercooling kit requires very little maintenance. In the first week of use we highly recommend
checking for leaks on a regular basis and monitoring the coolant level. Long term we recommend the following:
- Clean dust from the radiator every 12 months
- Change the coolant every 12-18 months
- Check the tubing for kinks
If you experience increased temperatures or increased noise you should check the coolant level and check for kinks in
the tubing.
6. Your system is now ready to use. When first booting
the system we would suggest monitoring the CPU
temperature.
Page 14/16