
CLEANING THE BREWING UNITS:
If necessary, the brewing / infusion unit
(23)
may be removed and rinsed under running water.
Important:
Do not use any cleaning products or abrasive cleaners.
1.
Press the On / Off button
(3)
to set the machine into the standby mode.
2.
Remove the Cover
(18)
for accessing the Brewing / infusion unit
(23)
on the right hand side.
3.
Unlock the Brewing / Infusion unit
(23)
by pressing the red switch
(25)
and turning the
handle
(24)
clockwise to the left until the stop position has been reached.
4.
Grasp the brewing / infusion unit
(23)
by the handle
(24)
and pull it out. The On/Off button
(3)
and Steam/Hot water button
(7)
will flash confirming the removal.
5.
Rinse the brewing / infusion unit
(23)
out to clean it –
Important:
Only water is to be used.
6.
Replace the brewing / infusion unit
(23)
.
7.
Press the red lever switch
(25)
and turn the handle
(24)
anti-clockwise to the right until the
stop position has been reached.
8.
Replace the cover
(18)
.