
FILTER USE: (optional)
1.
Empty the Water Reservoir
(1)
.
2.
Set the replacement date (in months) on the wheel situated on the top of the filter
(21)
.
3.
Screw the optional filter
(21)
with the filter accessory tool
(20)
into the corresponding
supporting unit found inside the Water Reservoir
(1)
.
4.
Fill the Water Reservoir
(1)
with fresh water and replace the reservoir into the machine.
5.
Place a suitably sized container (not to small) under the hot water nozzle
(9)
and rotate the
hot water knob
(8)
clockwise to the right. The system will now perform a brief rinsing cycle.
6.
Wait until the water stops flowing from the nozzle
(9)
, and then turn the knob
(8)
anti-
clockwise to
“0”
.
7.
The system may briefly heat up again, and will then be ready for use again.