7.
Place one
XPRESSO
Cleaning Tablet
in the ground coffee compartment and close the lid -
Important:
Do not put the cleaning tablet in the Water Reservoir
(1)
.
8.
Both symbols
(E)
“Fill Water Reservoir” and the 1 cup selector
(4)
will flash.
9.
Fill the Water Reservoir
(1)
with fresh water up to the ½ litre mark and replace into the
machine.
10.
Place a suitably sized container (about ½ litre) under the coffee outlets
(10)
.
11.
Press the 1 cup selector
(4).
12.
The cleaning procedure will now begin.
13.
The cleaning process is fully automatic and takes approximately ten minutes. Once the cycle
is complete, the symbol
(H)
“empty drip trays” will light up.
14.
Remove the drip tray
(11)
. Symbol
(H)
“empty drip trays” will start to flash.
15.
Empty and replace the drip tray
(11)
.
16.
The machine will briefly heat up if required. The On / Off button
(3)
will flash and the beans
symbol will light up. The system is ready for use again.