Please note:
When no points appear on the litmus paper, set the machine onto level 1.
Set the machine to the “Standby” mode.
3.
Press the Steam Preheat button
(7)
for approximately 4 seconds.
4.
The water hardness will be indicated by the number lit symbols, as described in the table
above.
5.
Press the Steam Preheat button
(7)
repeatedly until the desired level flashes.
6.
Confirm by pressing the On / Off button
(3)
.
7.
To confirm these settings, the corresponding symbols will flash again twice.
8.
Programming water hardness is now completed and the system is now ready to use.
Please note:
Should programming cycle be interrupted for longer than 1 ½ minutes, the machine
will automatically return to the “ready-to-brew” mode.