
2. OPERATIONAL START UP
2.1 PREPARING THE COFFEE MACHINE
•
Carefully remove the machine and all accessories from the packaging.
Please note:
it is advised that the original packaging is kept for future transporting.
•
Remove the Water reservoir
(1)
and rinse with clean, cold water.
•
Fill the reservoir no higher than the “MAX” mark, place it back in the machine ensuring that
the reservoir is positioned correctly and close the lid.
Please note:
Do not use sparkling water or any other liquid.
•
Open the lid of the coffee bean container
(14)
, fill it with coffee beans and close the lid
again.
Please note:
Do not use coffee beans which have been treated with sugar or other additives
during or after roasting, as they could damage the coffee grinder. Repair costs due to such
damage will not be covered by the warranty.
•
The steam/hot water knob
(8)
must be set off to
“0”
before operation.
•
Filling the system
- When you use the appliance for the first time, the pipes inside the
machine may not yet be filled with water - the machine will signal this with symbol
“E.”