5.
Place a suitably sized container (not to small) under the Hot Water nozzle
(9)
and turn the
Hot Water knob
(8)
clockwise to the right. The system will perform a brief rinsing cycle.
6.
Wait until the water stops flowing from the nozzle
(9)
, and then turn the knob
(8)
anti-
clockwise back to
“0.”
7.
The system may briefly heat up again, and will then be ready for use again.
5.3 CLEANING PROGRAMME
IMPORTANT - Please follow these instructions step by step:
The cleaning program thoroughly cleans all dispensing assemblies, removing coffee residues and
oily deposits which can build up and block up the machine. To run the program, use the special
Sprada Cleaning Tablets available through Sprada Direct.
IMPORTANT: This program is intended solely for cleaning the coffee dispenser and
brewing unit. It is not a lime scale removal process.
•
When the machine requires a clean, the symbol
(J)
“Clean Machine” will appear on the
display.