https://www.XPOtool.com
Item 61540, 61541
Page 5
The Tool Experts
05 2022-1
•
The extension cable must have a sufficient conductor cross-section. If an extension cable that
is wound on a cable drum is used, it must be completely unwound from the cable drum.
Risk of equipment damage!
The pump must be primed with water when the device is
reconnected. A device running dry can be damaged if the dry run is not recognized and
rectified immediately.
Filling and suction
61540
Please ensure that there is sufficient pressure if the pump has recently been completely emptied and
restarted.
1.
Pull out the power plug.
2.
Open the pressure line to completely drain the water.
3.
Loosen the plastic valve on the front of the pump head. The air control valve is located on the
back of the plastic valve.
4.
Connect the compressor hose to the air control valve.
5.
Wait until the filling pressure corresponds to the technical specifications.
6.
Reconnect the devices, check their function and increase the pre-charge pressure.
7.
Clean the filter after use.
61541
1.
Unscrew the pump cover.
2.
The pump must be completely filled with water.
3.
Refit the filter and screw on the pump cover and the sealing elements.
4.
If necessary, shorten the suction time by also filling the suction hose with water.
5.
Open the pressure line (tap or nozzle) so that the air can escape during the suction process.
6.
Switch on the device.
7.
Switch off the device when the water is discharged evenly.
8.
Clean the filter after use.
Maintenance
1.
Pull the power plug before maintenance work.
2.
The user may only carry out the maintenance and repair work specified in the operating instruc-
tions. Other defects may only be remedied by specialists.
3.
Use only original parts. Only these spare parts have been specially developed and manufac-
tured for the device. Using other spare parts will void the warranty. You or your surroundings
can also be endangered.
Risk of electric shock!
Please disconnect the power supply before servicing the device.
Caution:
All seals must be replaced when components are removed.
Errors and solutions
•
In most cases, the user can easily rectify problems himself. Before contacting us, please go
through the table below. This can save you and us a lot of work and possible costs.
•
If you cannot correct the error, please contact your dealer immediately. Please note that repair
work not carried out by an expert will invalidate the warranty and result in a claim for damages
and additional costs.
